







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Spring Valley, NV
A tub-to-shower conversion in Spring Valley typically runs $4,200 to $11,500, and most jobs are finished in three to six working days once the materials are on site. The work itself is straightforward: we pull the old tub, rebuild the wet wall and floor with the right waterproofing, then set a tiled or panel shower that fits the existing alcove footprint. What separates a conversion that lasts from one that fails is what happens behind the tile, and that’s the part we refuse to shortcut.
We do this work because the housing stock here keeps asking for it. Spring Valley has a lot of 1990s and early-2000s single-family homes where the original garden tub is now a trip hazard, a mold trap, or simply a space nobody uses. Our technicians bring up to 22 years of experience, and the company operates under The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it. If you’d like a written number before anything else happens, call (844) 797-3346 and a live person will pick up. For the larger picture of what we do across bathrooms, see our Bathroom Remodeling in Spring Valley page.
Every job comes with a written price before work starts and the 365-Day Done Right Promise in writing. If something fails inside that year, we come back and make it right at no charge.
Key Takeaways
- Most Spring Valley conversions cost $4,200 to $11,500 depending on size, waterproofing method and shower door.
- Waterproofing – the layer under the tile – is what decides whether your shower lasts 3 years or 30.
- Written price before demo, background-checked uniformed technicians, 365-Day Done Right Promise in writing.
- Alcove conversions usually fit the existing plumbing, which keeps the price down. Moving the drain is where costs climb.

When You Need Tub-to-Shower Conversion
Most of our Spring Valley calls start the same way: someone in the household has stopped using the tub entirely, or someone has started worrying about climbing over a wet rim. Here are the situations we see most often.
- Someone in the house has balance or mobility concerns. A low-threshold shower with a built-in seat and grab bars removes the step-over hazard a standard tub creates, especially on wet mornings. In the two-story homes off Tropicana and Rainbow, the upstairs hall bath is usually the one that gets converted.
- The tub has cracked, flexed, or started to stain around the drain. Older acrylic and fiberglass garden tubs in mid-90s builds develop hairline cracks at the drain collar. Once water gets under the acrylic, it soaks into the subfloor and the visible damage is the small part of the problem.
- You’ve found soft drywall or dark grout lines on the wall beside the tub deck. Spring Valley’s dry summer air and heavy indoor moisture swings punish poorly sealed tub surrounds. Soft drywall next to a tub usually means moisture has been getting past the surround for a while.
- The tub is never used and you’d rather have usable space. A standard alcove tub eats roughly 15 square feet. Converting it to a walk-in shower with a bench and niche gives you a room you’ll actually use every day.
- You’re planning to sell and the bathroom reads as dated. Buyers in Spring Valley react to a tired tub surround the way they react to a 20-year-old water heater – it signals deferred maintenance. A clean, tiled shower is one of the few room-level upgrades buyers consistently price in.
- You’ve already tried a tub liner or a refinished surface and it didn’t hold. Liners over a failing tub can trap moisture and usually outlive their warranty by months, not years. When a homeowner has been through that once, a full conversion is the honest fix.
Our Tub-to-Shower Conversion Process
Here’s the sequence for a typical Spring Valley conversion. We give you a written price at the free estimate, then a real arrival window for day one, and we keep to it.
- Free estimate and written price. We measure the alcove, look at the plumbing and subfloor, and talk through what you want – seat or no seat, tile or panel, frameless or framed door. You leave the conversation with a written number and a written guarantee, not a range on a napkin. The price you sign is the price on the invoice unless you ask for a change mid-job, in which case you’ll see the change in writing before we do it.
- Demo and inspection. We protect the floor and the path to the door, remove the tub, and open up the wall just enough to check the framing and the drain. This is the moment a lot of contractors hand you a surprise change order. We don’t – the written price covers the standard scope, and if we find something genuinely unexpected (a rotted floor joist, a drain that needs moving), we show you and price it before touching it.
- Subfloor and waterproofing. We lay a proper cement board substrate over the framing (the moisture-resistant layer that sits behind your tile) and coat the wet zone with a bonded waterproofing membrane. This is the step that separates a shower that lasts from one that grows mold behind the tile in two summers. We also slope the floor to the drain properly – a flat pan is the most common reason a shower puddles six weeks after install.
- Tile, panels, and fixtures. You choose the finish. We install from recognized trade brands – Kohler and Moen for the valve and trim, and for the tile we work with the same supply partners behind brands like Belgard and Unilock on our hardscape work, so the material quality is consistent across every job. A glass panel or frameless door goes in last, sized to the finished opening.
- Seal, clean, and walk-through. We grout, caulk the joints that need to flex, and test the shower running for a full cycle before we call it done. Then we walk you through what we did and hand you the written guarantee. If anything fails inside the 365-Day Done Right Promise, we come back and fix it at no charge – and we won’t charge a second visit fee to look at it.
If your conversion is part of a bigger change, it’s worth reading the full Bathroom Remodeling overview first – it covers what stays and what moves when a single fixture swap turns into a full room rebuild.

Tub-to-Shower Conversion Pricing in Spring Valley
Here are honest ranges for what a conversion costs in Spring Valley, based on the scope we actually quote. These are the real numbers we write on the estimate, not teaser prices that grow after demo.
| Scope | Typical Range | What drives it |
|---|---|---|
| Basic alcove conversion (panel or simple tile, standard valve) | $4,200 – $6,800 | Same drain location, standard size, minimal tile pattern |
| Mid-range tile shower with bench and niche | $6,500 – $9,000 | Custom tile layout, built-in seat, recessed shelf, upgraded valve |
| Premium tiled shower with frameless glass | $8,500 – $11,500 | Frameless door, large-format tile, premium trim, wider opening |
| Drain relocation or plumbing change | add $600 – $1,800 | Moving the drain, relocating the valve, or fixing old galvanized supply lines |
| Subfloor repair (rotted wood under the tub) | add $400 – $1,500 | Extent of water damage found after demo |
Two things move the number more than anything else: whether the drain stays put and what tile you choose. Keeping the existing drain location keeps the job in the lower band. Large-format porcelain or natural stone pushes it up, and a frameless glass door adds real cost over a framed one. We quote both so you can see the trade-off.
Spring Valley’s climate matters here in a way it doesn’t in wetter parts of the country. The dry air means caulk joints dry and crack faster than you’d expect, and indoor humidity from daily showers does more damage because the surrounding air is so arid. We seal and caulk with that in mind and tell you what to re-caulk and when – a small detail that protects a $9,000 shower.
Every estimate is free and every price is written before we start. Call (844) 797-3346 for yours – a live person answers, day or night.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Spring Valley?
A tub-to-shower conversion in Spring Valley costs $4,200 to $11,500, with most homeowners landing between $6,000 and $8,500. The biggest factors are whether the drain stays in place, the tile you choose, and whether the subfloor needs repair after demo. Call (844) 797-3346 for an exact written quote – the estimate is free.
Can you do the conversion in the same footprint as my existing tub?
Yes, and that’s the most common approach – a standard alcove tub is roughly 60 inches by 30 to 32 inches, and a custom shower pan fits exactly that opening without moving the drain or the wall framing. Keeping the footprint is what keeps the job in the lower price band. If you want a wider opening or a bench, we’ll tell you upfront what changes in the price.
How long does a tub-to-shower conversion take?
Most Spring Valley conversions are done in three to six working days once materials are on site. A simple panel shower is closer to three days; a full tiled shower with frameless glass and a bench runs toward the six. We give you a real arrival window for day one and keep to it, and if material delays change the schedule, you’ll hear it from a live person, not a voicemail.
Is a tub-to-shower conversion worth it compared to a tub liner?
A full conversion is worth it when the tub itself is failing – a liner covers a cracked tub but doesn’t fix the subfloor or the waterproofing problem that caused the crack. A liner is cheaper upfront and usually outlives its warranty by a few months. If the tub is sound and you just want a fresher look, a liner can make sense; we’ll tell you honestly which one fits your situation. Call (844) 797-3346 to talk it through – no pressure either way.
Every conversion we do includes a written price before demo, background-checked uniformed technicians who arrive in the window we gave you, and the 365-Day Done Right Promise in writing. Our technicians carry up to 22 years of experience on shower and wet-area work, and every call is answered by a live person 24/7. If you’ve been burned before by a contractor who disappeared after demo, this is the part we take seriously.
Ready to turn an unused tub into a shower you’ll use every day? Call (844) 797-3346 for a free estimate, or start by reading more about what we cover on the Spring Valley bathroom remodeling page.
Written by the team at Penhallow Remodeling Spring Valley, serving Spring Valley.


